The CMA 3RD-CNC Drilling Center is the third generation of successful predecessor models that are used every day around the world. The machine is designed with the latest generation of control of industrial PC, servo drives and servomotors of OMRON (Japan).

Special features of the 3RD-CNC drill center:
Simple graphical programming, including the GoTo function in manual mode, free programming in DIN / ISO (G commands), p. ex. for milling, thread milling, use of special tools, such as deburring tools 2-axis interpolation for X / Y axis, 3-axis interpolation for helical milling (X / Y / Z) Fast forward X axis = 30 m / min., Y axis = 30 m / min

Technical data

Technical data 3rd 3006 4506 6006 7506 9006 10506

Drilling capacity *

6 versions from Ø22 max to Ø42 max.

Threading capacity *

6 versions from max. M16 up to max. M27

main engine

8.9 kW, option 13.1 kW.

Spindle speed rpm

6 versions from max 2000 to max 6000

Max. Torque Nm

6 versions from maximum 57 to maximum 170

spindle cone

BT 40

Spindle / table distance mm

150-600

Work table length mm 3000 4500 6000 7500 9000 10500

Wide clamping table mm

580

T-slots (number / size / distance)

3/3/250

Travel axis x mm 3000 4500 6000 7500 9000 10500

Travel axis Y mm

600

Movement of the axis Z mm

450

Speed of the x axis

30 m / min

Speed and axis

30 m / min

Z axis speed

9.6 m / min

Weight kg 5250 6500 7250 8100 8900 9600

 

Machining possibilities CMA 3RD CNC drilling center

Dimensions of the product
Length (X) to: 3000/4500/6000/7500/9000/10500
(Products longer than the length of the machine are possible by means of resampling)
 Orifice pattern width (Y) up to: 600 mm (product width up to 1100 mm), height up to 400 mm
Drill flanges Drilling pattern up to diameter 600 mm, flange up to diameter 1100 mm

Drilling with standard
HSS tools
With diameter 25/28/32/38/42 in its entirety
(Depends on the type of machine)
Drilling with HSS-Co cutting drill Up to diameter 25/28/32/38/42
in the whole (depends on the type of machine)
Drilling with solid carbide Diameter 3-50mm,
It is fed up to 900mm / min
(Depending on the type of machine and tool)
helical milling Diameter of the largest hole
in solid material,
Programmable diameter
spindles Fits spindles with G76 cycle
lower Diameter 100% accurate
due to automatic correction
Height tolerances (option)
thread Up to M30 (type of machine and
Type of tool / dependent coating)
Drilling pipes Up to 32mm diameter.
Clean holes around
with thin wall tools technology
Milling pipes Round and long holes.
In ISO also free contours.
chamfer milling Chamfer milling preparation / welding
Bevel height of up to 14 mm in one pass and feed up to 3000 mm / min (depends on the type of tool)
grinding
Face mill diameter 50mm,
Depth of cut 3mm
Feed up to 1200mm / min
contourDifferent possible contours
by free programming
in DIN / ISO
roughing
Diameter 20mm, depth 7mm.
Flowdrill

Examples of rectangular tube 60x30x3mm.
G1 / 2 “standard and M8 flat
Flowdrill
Ø19 in 6 mm thickness of the material